HIT COUNTER

Training Table Construction Zone











Time to start working on Fetch. With the VJP behind us and the HZP only 5 months away for some it is time to get the Training Table built or pull it out of storage.
The only table around here was small and didn't have all the needed gadgets so we opted to build a new one. Pretty simple, could be done for around 100 bucks. Just need some 2x4's, a sheet of plywood, posts (wood or metal), cable to run the length of the table, a few snap closures, an extra collar and a foot hobbles made from 2 sided velcro. Some basic tools, saw, drill, tape measure and in some cases a Rat Tail File : ).
The one we built is 16 feet long with heavy duty uprights and cable. About 2 1/2 feet off the ground. Once the table is all built it is a good idea to get the dog up on it and walk them up and down the table while praising them and making them feel comfortable.
Once they feel comfortable you have done well, make sure you start off every session with making the dog feel comfortable. You can begin to place the dog's head through the collar on the post and affix the foot hobbles. The dog will most likely freak out but who wouldn't. Once the dog calms praise it and remove it from the table. Doing this a few times before you actually dig in to the training will help immensely. Now the dog should feel good about the table, and you know how the stationary collar and foot hobbles work.
At this point you can begin the training, showing the dog what "out, give,hand etc means with a gloved hand.Remember to stay calm.
Good luck and coming next, 3 dogs first time learning "out".

1 comment:

  1. Someone needs a shop....too much shit in that garage.....

    ReplyDelete